200W maglev.wind.turbine
1.Mitsubishi PLC Schneider relay
2.Touch screen interface
3.GPRS remote control
4.Hydraulic brake
Introduction:
A wind turbine is a device that converts kinetic energy from the wind into mechanical energy. If the mechanical energy is used to produce electricity, the device may be called a wind generator or wind charger. If the mechanical energy is used to drive machinery, such as for grinding grain or pumping water, the device is called a windmill or a wind pump. CRSNB's horizontal axis wind turbine is from 100W-50KW. It provides firm and durable for green and carbon life.
Our factory can produce horizontal axis wind turbine from 100W-50KW 1) Wind turbine for horizontal axis, and output for three phase permanent magnetic alternator generator. The generator designed with magnetic saturation function can work for 20 years under normal care. 2) Can design for both on grid and off grid system 3) Easy to install and Life span have 20 years 4) High efficiency of generator with low noise 5) Controller will dump load for protection when the voltage goes high, with manual brake system and PWM controller recharging6) Warranty is 3 years 7) Automatically adjust toward with direction 8) Select high quality bearing and magnet, easy to send out quantity of heat and keep magnetic property 9) Can supply power for water pump, TV, washer, fan and so on 10) Annual average energy for 5000kWh 11) Annual average energy for 750kWh
Model: | CRS-WT 200W |
Rated power(W): | 200 |
Rated voltage(V): | 12 |
Rotor diameter(m): | 2.2 |
Cut-in wind speed(m/s): | 3 |
Cut-out wind speed(m/s): | 25 |
Start-up wind speed(m/s): | 2.5 |
Rated wind speed(m/s): | 6 |
Safety wind speed(m/s): | 35 |
Furling type: | mechanism |
Rated rotating rate(r/m): | 400 |
Generator material: | Casted iron |
Blade material: | Fiber glass |
Blade quantity(pc): | 3 |
Guy cable tower height(m): | 6 |
Free stand tower height(m): | 8 |
Suggested battery capacity: | 12V/150AH 1pcs |
Matched inverter type: | Sine wave |
System weight without tower(KG): | 22KG |
Measure(CBM): | 0.25 |
20ft quantity(PCS): | 110 |
Tower thickness(mm) | 3.75 |
Tower diameter(mm) | 76 |